Serpentine Vase – Print & Assembly Guide (Updated)

This serpentine-style vase features a dramatic curve, which requires support structures during printing to maintain its shape.

Printing Instructions

Supports (Required)

• Support Type: Tree supports (recommended) or normal supports
• Placement: Touching build plate (preferred) or everywhere if needed
• Support Density: 10–15%
• Support Overhang Angle: 50°–55%
• Support Interface: Enabled (for cleaner removal)

👉 Tree supports work best here because they reduce scarring on the visible curved surface.

Recommended 3D Printing Settings

• Layer Height: 0.16–0.2 mm
• Wall Count: 3–4 walls
• Infill: 10–15% (gyroid recommended)
• Top/Bottom Layers: 4–6
• Print Speed: 40–50 mm/s (slower = better stability)
• Nozzle Temperature:
  • PLA: 200–210°C
  • PETG: 230–245°C
• Bed Temperature:
  • PLA: 50–60°C
  • PETG: 70–80°C

Adhesion & Stability

• Use a brim (8–12 mm) — your print is tall and can tip
• Enable Z-hop (0.2–0.4 mm) to avoid nozzle collisions
• Make sure belts and frame are tight to reduce wobble

Post-Processing

1. Carefully remove supports (pliers + patience helps).
2. Light sanding may be needed where supports touched.
3. Add weight (sand, stones, metal pellets) into the base.
4. Seal the base using super glue or epoxy.